Kostenloser Versand ab CHF 50.–
Bestellung per Rechnung möglich

PhotoShipOne - 3X PRO V2 3 Achs-Kamerahalterung mit Landegestell

Artikelnummer: PSO3XPRO

Schreiben Sie die erste Kundenmeinung

998.– statt 2'599.–

Versand per Post erfolgt am Dienstag

PhotoShipOne - 3X PRO V2 3 Achs-Kamerahalterung mit Landegestell

PhotoShip One brings you the 3X Pro v2. The lightest 3 axis camera gimbal (1.3lb – 590g) capable of carrying cameras as large as a Canon 5D/7D or even the Panasonic AF100 (for larger cameras see our 3X Pro HD). It is in use today by some of the industries to professionals.  We have sold over 400 3X Pro systems in the last 3 years.

 

The 3X Pro v2 is an improved design of the 3X Pro v1 which was designed by PhotoShip One in late 2009. The 3X Pro v2 is a 3 axis camera mount system. The pan, tilt, and roll axis are controllable via a standard RC airplane/helicopter controller. The 3X Pro v2 uses RC servos (included) which are controlled via pulse width modulation (pwm) with a sweep of 900us-2100us. The servos are 360 degree modified for continuous rotation. We have two servo options available (standard & high performance).

 

The roll arch rides inside of eight precision flange bearings. There is zero play or slop in the roll axis. Tilt axis is contained within the roll axis allowing for electronic stabilization.

The 3X Pro v2 is most commonly used with RC helicopters.  We have mounting solutions for Trex 600E & 700E, Logo 600, Logo 600 Carbon, Gaui X7, and Maji Joker 3.

 

The 3X Pro v2 is fabricated from CNC machined and anodized aluminum and composite fiber plate. It is able to fit cameras such as Canon 5D/7D, Sony FS100, Panasonic AF100, Red Epic, and similar sized cameras.  An optional camera tray upgrade is available and recommended for cameras over 3lb (1.4kg) weight.

 

The pan & tilt axis are gear driven with a 6:1 gear ratio for smooth motion. Roll axis is belt driven with 7:1 gear ratio. Adjustable gear mesh on pan/tilt allows for slop free, low backlash setting. Gear pitch is 48. Servo pinion gear 20 tooth, main gear 120 tooth. 1/4″ gear face thickness offers durability.

 

The roll axis utilizes an MXL series toothed timing belt.  Servo to roll axis reduction is 7:1.  Smooth, slop free, and precise motion is easily achievable. Roll pulley axle is double bearing supported.


Standard adjustable camera tray is capable of accepting most DSLR cameras similar in size to Canon 5D, Nikon D800.  Other cameras such as Red Epic, Sony FS100, and Panasonic AF100 also fit but it’s recommended to use the upgraded Carbon/Aluminum Tube Camera Tray (below). Standard tray is adjustable by 20mm in vertical dimension to allow for camera center of mass to align with tilt axis.

 

All of the parts of the 3X Pro are precision machined in the USA by certified aerospace industry machine shop facilities. Tolerances on parts are very tight allowing for strong and light structures that stand the test of time. Aluminum parts on the 3X Pro are anodized to protect against corrosion increase surface hardness and offer visual appeal.

Schreiben Sie Ihre eigene Kundenmeinung

Sie geben Ihre Meinung ab zu: PhotoShipOne - 3X PRO V2 3 Achs-Kamerahalterung mit Landegestell

Wie bewerten Sie diesen Artikel? *

  1 Stern 2 Sterne 3 Sterne 4 Sterne 5 Sterne
Produktqualität
Preis/Leistung
Erfüllt der Artikel die Erwartungen