Kostenloser Versand ab CHF 50.–
Bestellung per Rechnung möglich
OS

OS Motor FSa-155-P

Artikelnummer: EE772

Schreiben Sie die erste Kundenmeinung

629.–

Lagerstatus: Nicht an Lager

OS Motor FSa-155-P

FEATURES: Ideal for 120 size scale and sport models and aerobatic models
            requiring stable power and linear throttle response
          PD-08 pump and 70R carburetor integrated with regulator ensures
            stable fuel delivery regardless of model attitude and fuel level
          F-6020 three piece design muffler with center heatsink
          New internal lubricating system eliminates breather tubing from the
            crankcase
          Two year limited warranty through Hobby Services beginning at date of
            purchase

INCLUDES: FSa-155-P Four Cycle Engine with PD-08 Pump System, 70R Carburetor
            F-6020 Muffler, Header Pipe, type F Glow Plug, Needle Valve
            Extension Cable, Instruction Manual

REQUIRES: Fuel: Glow fuel with 5-20% nitro content and no less than 18%
            lubricant content
          Propeller: 16x8-12 or 17x8-12
          Glow Starter
          Field equipment

SPECS:    Displacement: 1.548 cu in (25.36cc)
          Bore: 1.323" (33.6mm)
          Stroke: 1.126" (28.6mm)
          Practical RPM: 2,000 - 10,000 RPM
          Power Output: 2.6hp @ 10,000 RPM
          Engine Weight: 28.40 oz (805g)
          Muffler Weight: 3.35oz (95g)
            Carburetor Settings-
          Needle Valve: 2-1/2 - 3 turns from fully closed
          Mixture Control Valve: Factory set, make only small adjustments if
            needed, after adjusting needle valve as described in manual, turn
            30° to lean idle mixture or 90° counterclockwise to richen mixture
            then back again 45° clockwise

          Width at Mounting Tabs: 2.6" 67mm)
          Crankcase Width below Mounting Tabs: 1.8" (47mm)
          Length from Drive Washer to rear of Carburetor: 5" (127.5mm)
          Height from Mounting Tab to Pushrod Cover: 4.5" (114mm)
          Height from bottom of Crankcase to Pushrod Cover: 5.4" (138.6mm)
          Distance between Mounting Hole Centers Same Side: 0.98" (25mm)
          Distance between Mounting Hole Centers Opposite Side: 2.3" (58mm)
          Distance/front Mounting Hole Center to Drive Washer: 2.5" (64.5mm)
          Distance/ Center of Engine to Drive Washer: 3.03" (77mm)
          Crankshaft Size: 5/16-24

Schreiben Sie Ihre eigene Kundenmeinung

Sie geben Ihre Meinung ab zu: OS Motor FSa-155-P

Wie bewerten Sie diesen Artikel? *

  1 Stern 2 Sterne 3 Sterne 4 Sterne 5 Sterne
Produktqualität
Preis/Leistung
Erfüllt der Artikel die Erwartungen